A complete set of gypsum board production line equipment is completed by multiple equipment, including mixing machine, molding machine, film coating machine, etc. Today, we will sort out some equipment breakdown instructions for gypsum board production line.
Plasterboard production line laminating machine:
The plasterboard production line laminating machine can complete double-sided film pasting at one time, which is more efficient than the previous single-sided film pasting machine (laminating machine) and greatly saves manpower and material resources. The roll and flattening roll are controlled by air cylinder, with fine workmanship and close spacing, which can better achieve the firmness of the film and greatly save the use of glue. The machine is equipped with special heating equipment to ensure normal use in winter. Double-sided pasting and laminating machine: This machine is a double-sided pasting and laminating machine that makes decorative films and plates stick together. The laminating machine is mainly used for surface laminating treatment of PVC, plastic door panels, wooden floors, MDF, plywood, foam boards, gypsum boards, etc.
Gypsum board production line cutting machine:
Adopt two-way cutting technology to complete gypsum board cutting at one time. The spacing between saw blades can be adjusted to meet the production and processing requirements of ceiling of various sizes. The size change is simple without large-scale disassembly. The section is neat and smooth, with high efficiency. This unit is applicable to the cutting of gypsum board and other boards. The process flow is: upper board → longitudinal slitting → transverse conveying → transverse slitting → plate output → plate stacking. Transverse saw and longitudinal saw are welded with 12mm steel plate. The upper and lower parts of the machine head are transported by rubber rollers. The upper two rollers are powered to make the plate run more stable. It has the function of manual transverse adjustment. The cutting motor is 1.5KW. The cutting saw blade is made of high hardness alloy saw blade, which is durable. Advantages: It adopts twice cutting and deburring device. After cutting, it is smooth and free of burrs, reducing the difficulty of edge sealing. Cut into small plates, opposite sides and corners, all within the tolerance range specified by the state. The automatic cutting machine is equipped with electrostatic pulse dust remover, which can effectively absorb all dust on the surface of the plate. There is no flying dust in the working area, and the environmental protection effect is good.
Plasterboard production line packaging machine:
The PLC electric control device and cylinder adjustment are adopted to say goodbye to the heavy manual edge sealing history. Process flow: upper plate → brush dust removal → longitudinal edge sealing → transverse conveying → transverse edge sealing → plate discharge. The photoelectric switch and automatic sensing device are used. After receiving the signal, the plate is automatically transported, and the edge is sealed to the plate. The wallboard and bracket are made of high-quality steel, the conveying roller is made of stainless steel, the upper and lower parts of the machine head are transported by rubber rollers, and the upper and lower parts are powered to make the plate run more stable. The pressure can be adjusted according to the thickness of the plate. After edge sealing, there is no excess tape on the edge of the finished plate, which is beautiful and does not waste material. It is an advanced ceiling edge banding equipment with high speed, high efficiency, saving a lot of manpower and material resources.
Plasterboard production line packer:
It is composed of conveyor, packaging machine and heat shrinking machine, with compact structure, stable performance and simple operation. PLC touch screen electrical control is adopted, and parameter setting is convenient and fast. Packaging, sealing and cutting are fully automatic. After packaging, infrared heating is used to shrink the shrink film. The wind circulation system is used in the shrink heating room to make the indoor temperature more uniform and make the shrinkage of all parts of the object more reasonable. The speed can be adjusted arbitrarily and the temperature can be controlled automatically. The finished product is beautiful and well sealed. The package of the unit is completed at one time, with fast speed, high output and saving a lot of manpower and material resources. It is the current ceiling packaging equipment.
Plasterboard production line veneer machine:
The automatic plasterboard production line veneer machine has the best veneer quality in the country. The front of the veneer is flat and flat without bubbles, and the back is smooth as a mirror. The equipment is widely used for laminating the surface of density board, ceiling, multi-layer plywood, PVC foam board, blockboard, glass, acrylic, mosaic and various plane boards. It can be fitted with PVC film, wood-grain paper, lacquer-free paper, protective film, high-gloss film, etc. Through technology and equipment, we can produce bright and elegant crystal plates, colored diamond plates and furniture veneer panels of various colors to automatically finish gluing, veneering, drying, hot pressing and paper cutting. With advanced technical indicators, high precision, reasonable layout, novel structure and convenient operation, it is an ideal equipment for sheet lamination. It can be used for automatic packaging of ceiling, floor, carton packaging products, beverages, books and other products that need heat shrink packaging.
Stacker of gypsum board production line:
Stacker is an important lifting equipment in the three-dimensional warehouse, which plays a lot of roles in the current cargo handling. Its main purpose is to operate in the passageway of the stereoscopic warehouse, store the goods at the lane entrance into the cargo bin, or take the goods out of the cargo bin. Now the gypsum board stacker manufacturers provide a wide range of equipment. When purchasing, we must go to the regular gypsum board stacker manufacturers to ensure the quality and after-sales service of the gypsum board stacker. 1. Our gypsum board stacker equipment has been inspected by the national quality inspection department, and its quality and performance are guaranteed. 2. The surface of the gypsum board stacker is smooth and has strong scratch resistance and wear resistance. 3. The gypsum board stacker has extremely strong impact resistance and load-bearing capacity, and its compressive strength is also very strong. 4. The gypsum board stacker also has excellent performance and can be used for a long time.