03
2023
-
01
What should be paid attention to in the maintenance of gypsum board production line
The daily maintenance of gypsum board production line is relatively simple, and generally no major problems will occur. During mechanical installation, Xinze Machinery is responsible for training operators and maintenance personnel for the manufacturer. Generally, they can learn how to operate and maintain within one week.
1、 Pay attention to the maintenance of transmission and control lines. This is mainly to prevent the line from being pulled and rolled due to human negligence. Also, the mechanical upper and lower board machines and other parts need to work reciprocally, which may also have some impact on the circuit. It is relatively simple to check the integrity of the circuit and the tightness of each interface.
2、 Wear condition of each sliding part. There must be some friction in the use of machinery, especially the loading and unloading machines, palletizing machines and palletizing machines of the automatic pvc gypsum ceiling production line. It is necessary to regularly check the opposite slide rail, guide rail and sliding block, and replace them in time if they are seriously worn. These parts do not need to be disassembled and replaced easily.
3、 Fastening of motor and other parts. These parts are generally fixed by screws, and maintenance is relatively easy.
4、 Pay attention to the tightness of chain and other transmission parts, and make appropriate adjustment according to the production situation.
5、 Wipe each probe to ensure that the probe is not covered by dust, resulting in inaccurate positioning. At the same time, pay attention to the wear of the saw blade and replace the saw blade of the gypsum board saw in time.
News
Mobile version